The CCNA R&S v3.0 Certification requires passing the following Exams:
- Exam 100-105 ICND1 v3.0 AND Exam 200-105 ICND2 v3.0
- OR Combined Exam 200-125 CCNAX v3.0 (Accelerated)
This new version requires 1900 Series ISR G2 Routers to cover all new Topics!
To meet this important need, this Lab Kit is composed of 3 x 1900 ISR G2 Routers!
Although the previous generation of Routers (ISR G1 such as the 1800/2800 Series) can still be used for basic CCNA Training, some new Topics of the new CCNA v3.0 Certification can only be covered with ISR G2 Routers!
For that reason all Cisco Networking Academies now use the 1900 Series for their current CCNA Training Courses.
These are the main components of this Lab kit: 3 x 1941 Routers + 3 x 2960 Switches.
All three 1941 Routers are loaded with IOS 15.7M (most current version!)
All 2960 Switches are loaded with IOS 15.0.2 (highest version supported by them)
1941 Routers have 3 x Gigabit Ethernet Ports and 512 Gb. RAM / 256 Gb. Flash Memory.
Here is a detailed list of the main components:
- R1: 1941 Router 512D/256F; 2 Gigabit Ethernet Ports, 2 Serial Ports, IOS 15.7M - R2: 1941 Router 512D/256F; 2 Gigabit Ethernet Ports, 2 Serial Ports, IOS 15.7M - R3: 1941 Router 512D/256F; 2 Gigabit Ethernet Ports, 2 Serial Ports, IOS 15.7M - S1: 2960-TT Switch with IOS 15.0.2 - 24 Fast Ethernet + 2 x Gigabit Ethernet Ports! - S2: 2960-TT Switch with IOS 15.0.2 - 24 Fast Ethernet + 2 x Gigabit Ethernet Ports! - S3: 2960-TT Switch with IOS 15.0.2 - 24 Fast Ethernet + 2 x Gigabit Ethernet Ports!
Please notice that we offer several different upgrade options. For instance:
- Serial Port Card Upgrade (HWIC-1DSU-T1 to HWIC-2A/S Cards)
- 3560 Switch Upgrade: 2960's can be upgraded to 3560-TS (true Layer 3 Switch!)
Other available upgrade options include:
- USB to Serial DB9 Adapter (needed on Computers/Laptops with no Serial DB9 ports)
- CAB-CONSOLE-USB Cable (provides a direct Mini USB to standard USB 2.0 connection!)
- Terminal Server to allow access to all devices from a single location.
- Small Steel Rack to mount all the equipment.
- Mounting Brackets to attach the equipment to a Rack.
All Serial Ports in this kit are implemented with HWIC-1DSU-T1 Cards. These cards have a fixed Data Transmission Rate of 1.544 Mbps (T1 speed)
They do not use DCE/DTE Cables, but rather Serial Cables with RJ-48 connectors. However, they can still operate as regular Serial Ports, but at a much lower cost!
This kit also includes:
- 1 x Standard Console Cable
- 3 x CAT5 Crossover Ethernet Cables
- 3 x CAT5 Straight Through Ethernet Cables
- 3 Serial Cables Crossover Back-to-Back (with RJ-48 connectors)
- 6 Power Cables (not included with international orders)
- 1 x Accompanying Disk (see below for details)
These are the main training materials sections that you'll find in the Disk:
- Lab Exercise Guide: Lab Exercises from the latest Cisco Networking Academy Workbook.
- Lab Setup Instructions: Installation and Lab Setup Guide.
- eBooks: ICND1 100-101 & ICND2 200-101 Official Cert Guide and many others.
- White Papers: Multiple articles for specific topics: LAN Switching, Routing Protocols, etc.
- Exam Questions & Answers: CCENT/CCNA Exam Questions & Answers.
- Cisco IOS Images: Latest IOS Images for all devices (Routers and Switches)
Our Labs are fully tested! Therefore, all components are guaranteed to work!
We configure and test each Lab before we ship! We invest hours in making sure that everything works perfectly, so you don't have to waste your time troubleshooting!
Please take into account that we need 1-2 business days to configured and test this CCNA kit.