This is a complete Cisco CCNA/CCENT Lab kit, fully configured and tested!
It follows the Lab Topology and the equipment requirements of the CiscoPress® Lab Workbook CCNA Exploration 4.0. Therefore, with this Lab kit you'll have a clear path to follow!
This is an Advanced CCNA Lab kit composed of 3 x 2610XM Routers which come loaded with IOS 12.4. (Adv. Enterprise version). All Routers come with 128 Mb. RAM / 32 Mb. Flash.
Here is a detailed list of the main components:
- R1: 2610XM Router 128D/32F1 Fast E. Port, 1 Serial Port (WIC-1T card)
- R2: 2610XM Router 128D/32F1 Fast E. Port, 1 Serial Port (WIC-1T card)
- R3: 2610XM Router 128D/32F1 Fast E. Port, 4 Serial Ports (NM-4A/S module)
(Configured as a 4-Port Frame Relay Switch. It supports F/R Hub & Spoke Lab Exercises!)
- S1: 2950 Switch (24 Fast Ethernet Ports)
- S2: 2950 Switch (24 Fast Ethernet Ports)
NOTE: This kit includes a 4-Ports Frame Relay Switch (2610XM Router + NM-4A/S module).
This allows the configuration of a Frame Relay Switch with Hub & Spoke capabilities!
This device comes pre-configured as both, Frame Relay Switch and Frame Relay Hub Router! This is a very unique feature that you won't find anywhere else!
Please notice that we offer several different upgrade options. For instance:
- 2950's can be upgraded to the Enhanced Image version: 2950C-24 or 2950T-24 - 2600XM's can be upgraded to Max Memory: 256 Mb. RAM / 48 Mb. Flash, so that they support additional Applications such as CME (Communications Manager Express)
You can also add one more Serial Port to R1 and R2 (some of the Lab Exercises do require a second Serial Port).
Other available upgrade options include:
- Mounting Brackets for Rack Mounting can be added.
- 2509 Terminal Server can be added, which allows access to all devices from a single location.
- 1 Console Cable
- 3 Serial Cables Crossover Back-to-Back (DCE-DTE)
- 2 x CAT5 Straight Through Ethernet Cables
- 2 x CAT5 Crossover Ethernet Cables
- 2 x CD's (one with Training Videos & one with other Training Materials)
- 5 Power Cables
This Lab comes with complete Setup Instructions, so you won't have to wonder what to do next. It includes a very unique feature: a Frame Relay Switch so that you can gain a TOTAL understanding of the Frame Relay technology!
If you are currently attending Cisco training sessions at places like the Cisco Network Academy or similar, then you do need some practice gear, and this Lab will help you reach your goals faster!
This Lab will prove to be a very valuable tool if you are preparing for the CCENT Certification (Exam 640-822 ICND1) or for the complete CCNA Certification (Exams 640-822 ICND1 & 640-816 ICND2).
Accompanying CD's:
With this Lab we provide three valuable CD's with tons of Training Materials (one more CD than our other CCNA kits)
CD1: includes hundreds of Exam-like Questions (with their proper Answers and Explanations) for the Cisco CCNA Exams (640-802, 640-816, and 640-822). It also includes dozens of articles and eBooks for most almost every topic that you'll find in your exams!
CD2: includes dozens of Training Videos for several CCNA/CCNP related topics such as LAN Switching, VLANs, Trunking, SDM, WAN (Serial) Links, Frame Relay, Static Routing, Dynamic Routing Protocols (RIP, EIGRP, OSPF, BGP), MPLS, Router Security, etc.
CD's include dozens of White Papers and articles about some important day-to-day tasks, and about more advanced topics.
For instance, if you are not very familiar with the IOS upgrade procedure (or an initial IOS load), then you'll find complete instructions for that. Or if you need to work on more advanced topics such as SDM (Security Device Manager), then you'll get instructions for that as well.
And if you need to work on Security-related topics such as the Cisco IOS Firewall Feature Set (CBAC & other features), or Dynamic Routing Protocols such as RIP, EIGRP, OSPF, or BGP, then here you'll find the relevant information to do that, as well as the equipment to actually implement it!
You'll also find information about Cisco Packet Tracer, a simulation tools widely used in Cisco Network Academies.
Frame Relay Lab Exercises:
In this kit R3 includes 4 Serial ports and although it can be used as a general purpose Router,
it is mainly meant to be a Frame Relay Switch.
This is one of the most unique features of this package because we provide a complete set of Lab Exercises, that without a doubt, will give you a TOTAL understanding of the Frame Relay technology! (it includes Frame-Relay Hub-and-Spoke)
Note that at least 4 Ports are needed for the Frame Relay Hub & Spoke Lab Exercises.
Here is the complete list of the 21 Frame Relay configuration scenarios included in this package:
1. Frame-Relay Back-to-Back (no Frame Switch)
2. Frame-Relay Inverse-ARP
3. Frame-Relay Static Mapping
4. Frame-Relay Inverse-ARP & Static Mappings
5. Frame-Relay Multipoint Interfaces: Inverse-ARP
6. Frame-Relay Multipoint Interfaces: Static Mappings
7. Frame-Relay Multipoint Interfaces: Inverse-ARP & Static Mappings
8. Frame-Relay Point-to-Point (P-to-P) Subinterfaces
9. Frame-Relay P-to-P Subinterfaces and Main Interfaces: Inverse-ARP
10. Frame-Relay P-to-P Subinterfaces and Main Interfaces: Static Mappings
11. Frame-Relay P-to-P Subinterfaces and Multipoint Subinterfaces: Inverse-ARP
12. Frame-Relay P-to-P Subinterfaces and Multipoint Subinterfaces: Static Mapping
13. Frame-Relay Multipoint Subinterface, Inverse-ARP and Main Interface, Inverse-ARP
14. Frame-Relay Multipoint Subinterface, Inverse-ARP and Main Interface, Static Mapping
15. Frame-Relay Multipoint Subinterface, Static Mapping and Main Interface, Inverse-ARP
16. Frame-Relay Multipoint Subinterface, Static Mapping and Main Interface, Static Mapping
17. Frame-Relay Hub-and-Spoke, Main Interfaces with Inverse-ARP
18. Frame-Relay Hub-and-Spoke, Main Interfaces with Inverse-ARP & Static Mappings
19. Frame-Relay Hub-and-Spoke, Main Interfaces with Static Mappings
20. Frame-Relay Hub-and-Spoke, Main Interfaces with Inverse-ARP & P-2-P Subinterfaces
21. Frame-Relay Hub-and-Spoke, Main Interfaces with Static Mappings & P-2-P Subinterfaces
Again, this is a unique feature! You won't find this anywhere else!
Our Labs are fully tested! Therefore, all components are guaranteed to work! They come a standard 60 days replacement warranty! We don't just provide a set of pieces put together.
We configure and test each Lab before we ship! We invest hours in making sure that everything works perfectly, so you don't have to waste your time troubleshooting!
Please take into account that we need 2-3 business days to configured and test this CCNA kit.
