Header Graphic
ISR and Voice Enabled Routers with CME (Call Manager) > Cisco 2811 256Mb RAM/128Mb Flash with CME 8.6
Cisco 2811 256Mb RAM/128Mb Flash with CME 8.6

The product you selected is currently unavailable.

Orig. Price: $139.99
Sale Price: $119.99
Availability: in stock
Prod. Code: 2811-CME

This is a Voice-enabled Cisco 2811 ISR Router loaded with CME 8.6 (Cisco Unified Comm. Manager Express). IOS version is 15.1.4.M (Adv. Ent. Serv.) and it also includes CCP 2.7

Memory Size is: 256 Mb. DRAM and 128 Mb. Flash.

The Router is shipped Fully Configured and ready to use in a VoIP Phone Network (SCCP & SIP)

Features Summary:

These are the main features of this 2811 Voice-enabled Router:

- 256 Mb. in DRAM and 128 Mb. in Flash
- Loaded with CME 8.6 (Cisco Communications Manager Express)
- Loaded with CCP 2.7 (Cisco Configuration Professional)
- 2 x Fast Ethernet Interfaces
- IOS 15.1.4.M Adv. Enterprise Services (needed for CME 8.6)

The 2811 supports up to 35 IP Phones and up to 144 Virtual Ports (Virtual Ports determines the Max. # of Directories)

A Bonus Disk is included with this Router!

The Disk includes all Software elements: CME 8.6, CCP 2.7, IP Communicator, IOS Images & dozens of IP Phone Firmware Files!

IP Communicator is a Software-based Phone (or Soft-Phone) that can be used to make actual phone calls. You can even install IP Communicator on more than one PC and thus simulate a Phone Network without actual IP Phones!

Moreover, it supports multiple lines and directory numbers and therefore it can handle multiple calls!

The Disk also includes a Lab Exercise Guide (eBook in PDF format): CCNA Voice Lab Manual


With this Router you can implement a LAN-based Phone Network that can also make & receive Phone calls outside the LAN using the Voice Modules included with it.

To connect IP Phones to the CME Router you would need LAN Switch; if possible with PoE (Power over Ethernet) which would eliminated the need for Phone Power Supplies.

One port of the Switch would be connected to the Router's Ethernet interface, while the other ports would be used for the IP Phones.

Detailed configuration is needed in the Router (6 sections) in order to support SCCP & SIP Phones
But this configuration has been already done on this Router!

So if you to add a PoE Switch and IP Phones, you'll be ready to start making phone calls!

No other Hardware is required to make calls between the Phones connected to the LAN!