This kit is similar to Lab CCNA-2620-1, but it includes 3 x 2950 Switches instead of just two.
This is a complete Cisco CCNA/CCENT Lab kit, fully configured and tested!
It follows the Lab Topology and the equipment requirements of the CiscoPress® Lab Workbook CCNA Exploration 4.0. Therefore, with this Lab kit you'll have a clear path to follow!
All Routers come loaded with IOS 12.4 (12.4.25 ENT version) which supports special functions such as VLAN Trunking. And Router R1 (2620XM) comes loaded with SDM! (Security Device Mgr)
The following are the six Main Components:
- R1: 2620XM Router 128D/32F with SDM + 2 Serial Ports + 1 Fast Eth. (Frame/Relay Switch)
- R2: 2620 Router 64D/16F + 1 Serial Port + 1 Fast Ethernet Port - R3: 2620 Router 64D/16F + 1 Serial Port + 1 Fast Ethernet Port - S1: 2950 Switch: 24 Fast Ethernet Ports - S2: 2950 Switch: 24 Fast Ethernet Ports - S3: 2950 Switch: 24 Fast Ethernet Ports
Please notice that we offer several different upgrade options. For instance:
- 2950's can be upgraded to the Enhanced Image version: 2950C-24 or 2950T-24 - 2620's can be upgraded to 2620XM. XM Routers support SDM!
You can also add one more Serial Port to R1 and R2 (some of the Lab Exercises do require a second Serial Port). Serial Ports are implemented w/ WIC-T1 cards (WIC-1DSU-T1: 1.544 Mbps T1)
Other available upgrade options include:
- Mounting Brackets for Rack Mounting can be added.
- 2509 Terminal Server can be added, which allows access to all devices from a single location.
- 1 x Console Cable
- 2 x Serial Crossover Cables (Serial RJ-45 for T1 cards)
- 3 x CAT5 Straight Through Ethernet Cables
- 3 x CAT5 Crossover Ethernet Cables - 2 x CD's (one with Training Videos & one with other Training Materials)
- 6 x Power Cables
This Lab comes with complete Setup Instructions, so you won't have to wonder what to do next. It includes a very unique feature: a Frame Relay Switch so that you can gain a TOTAL understanding of the Frame Relay technology!
If you are currently attending Cisco training sessions at places like the Cisco Network Academy or similar, then you do need some practice gear, and this Lab will help you reach your goals faster!
This Lab will prove to be a very valuable tool if you are preparing for the CCENT Certification (Exam 640-822 ICND1) or for the complete CCNA Certification (Exams 640-822 ICND1 & 640-816 ICND2).
With this Lab we provide two valuable CD's with tons of Training Materials! For more information about the contents of these CD's, please check out the CD Contents page.
CD1: includes hundreds of Exam-like Questions (with their proper Answers and Explanations) for the Cisco CCNA Exams (640-802, 640-816, and 640-822). It also includes dozens of articles and eBooks for most almost every topic that you'll find in your exams!
CD2: includes dozens of Training Videos for several CCNA/CCNP related topics such as LAN Switching, VLANs, Trunking, SDM, WAN (Serial) Links, Frame Relay, Static Routing, Dynamic Routing Protocols (RIP, EIGRP, OSPF, BGP), MPLS, Router Security, etc.
CD's include dozens of White Papers and articles about some important day-to-day tasks, and about more advanced topics.
For instance, if you are not very familiar with the IOS upgrade procedure (or an initial IOS load), then you'll find complete instructions for that. Or if you need to work on more advanced topics such as Dynamic Routing Protocols (RIP, EIGRP, OSPF, BGP), then here you'll find the relevant information to do that, as well as the equipment to actually implement it!
You'll also find information about Cisco Packet Tracer, a simulation tools widely used in Cisco Network Academies.
Frame Relay Lab Exercises:
One the unique features of this training kit is the inclusion of a 2-Ports Frame Relay Switch, with which you will surely gain a TOTAL understanding of the Frame Relay technology (a Core CCNA/CCNP/CCIE topic)!
We include a set of 16 different Frame Relay Lab scenarios::
1. Frame-Relay Back-to-Back (no Frame Switch)
2. Frame-Relay Inverse-ARP
3. Frame-Relay Static Mapping
4. Frame-Relay Inverse-ARP & Static Mappings
5. Frame-Relay Multipoint Interfaces: Inverse-ARP
6. Frame-Relay Multipoint Interfaces: Static Mappings
7. Frame-Relay Multipoint Interfaces: Inverse-ARP & Static Mappings
8. Frame-Relay Point-to-Point (P-to-P) Subinterfaces
9. Frame-Relay P-to-P Subinterfaces and Main Interfaces: Inverse-ARP
10. Frame-Relay P-to-P Subinterfaces and Main Interfaces: Static Mappings
11. Frame-Relay P-to-P Subinterfaces and Multipoint Subinterfaces: Inverse-ARP
12. Frame-Relay P-to-P Subinterfaces and Multipoint Subinterfaces: Static Mapping
13. Frame-Relay Multipoint Subinterface, Inverse-ARP and Main Interface, Inverse-ARP
14. Frame-Relay Multipoint Subinterface, Inverse-ARP and Main Interface, Static Mapping
15. Frame-Relay Multipoint Subinterface, Static Mapping and Main Interface, Inverse-ARP
16. Frame-Relay Multipoint Subinterface, Static Mapping and Main Interface, Static Mapping
Our Labs are fully tested! Therefore, all components are guaranteed to work! They come a standard 60 days replacement warranty! We don't just provide a set of pieces put together.
We configure and test each Lab before we ship! We invest hours in making sure that everything works perfectly, so you don't have to waste your time troubleshooting!
Please take into account that we need 1-2 business days to configured and test this CCNA kit.
Note: Serial Ports are implemented with WIC-1DSU-T1 (1.544 Mbps T1) cards
