Header Graphic
Router-Based Voice Kits > Voice 2911-2: 2911 CME 12.0 + 3560v2 + 2x7942 Phones + FXO Card
Voice 2911-2: 2911 CME 12.0 + 3560v2 + 2x7942 Phones + FXO Card

The product you selected is currently unavailable.

Orig. Price: $449.99
Sale Price: $429.99
Availability: in stock
Prod. Code: Voice-2911-2

Please check out the Current Offers & Discount Coupon Codes that apply to this item.

This CCNA Voice Lab is a fully configured Lab, ready to use from the first minute!
Once the proper connections are made, you'll be able to make Phone calls right away!

This Lab kit is based on a Voice-enabled Cisco 2911 ISR G2 Router w/ Cisco Unified CME 12.0 (Cisco Unified Communications Manager Express) & with CCP 3.1 (Cisco Conf. Professional)

Memory size is: 512 Mb. RAM / 512 Mb. Flash. IOS version is 15.7.3.M4b Universal K9

NOTE: The 2911 Router requires a special License (SL-29-UC-K9) to support CME 12.0.
This License is already included and installed in the Router!

CME 12.0 provides support for the most current IP Phones such as the 78XX, 88XX and 99XX
(these IP Phones are not supported under CME 8.6)

This kit is similar to kit Voice-2911-1, but it includes a VIC2-4FXO card and a PVDM3 module
An FXO card provides the ability to make calls outside the LAN environment and
the PVDM3 module is required to make the FXO card work (it won't work without it).

Note: An active Phone Line is needed to make/receive External Phone Calls. The Phone Line can be implemented in multiple ways: standard Land Line, Vonage, Magic Jack, etc.

This is the complete list of main components:

- 1 x 2911 Router 512D/256F loaded with UC License and Call Manager Express (CME 12.0)
- This Router includes a VIC2-4FXO Card and a PVDM3-16 Module (DSP processor)
- 1 x 3560v2-PS Switch with PoE with 24 Fast Ethernet Ports and IOS 15.0
- 2 x 7942 Phones
- Cisco IP Communicator 8.6 (Software-based Phone)

The 2911 Router supports up to 50 IP Phones (SCCP or Phones) and up to 300 Virtual Ports!

For more details about the Max. # of Phones supported, please check out the following URL:

Cisco 2911 Router: Max. Number of Phone Supported and Memory Specifications

The new CCNA Collaboration requires working knowledge of Call Manager Express (CME),
which is Router-based, and Cisco Unified Call Manager (CUCM), which only runs on Servers.

This kit is the perfect tool for the CME section of the CCNA Collaboration Exam 210-060-CICD (Implementing Cisco Collaboration Devices)

For the CUCM section you'll need a CUCM Server, which is offered as a separate item.
For more information about them, please go to the CUCM Servers Menu.


Cables and other Accessories:

- 1 x Console Cable
- 3 x CAT5 Straight Through Ethernet Cable
- 2 Power Cables (not included with international orders)
- Accompanying Disk with Training Materials (please see below)


Upgrades Section:

Several different upgrade options are available for this kit. For instance:

- Additional IP Phones may be added
- PVDM3 Module may be added to support Voice Cards
- Other Voice Cards may be added, such as: VIC3-FXS, VWIC / VWIC2-MFT
- Small Steel Rack to mount all the equipment.
- Mounting Brackets to attach the equipment to a Rack.
- Fully configured Server with CUCM (Cisco Unified Call Manager)


Lab Setup:

All devices are shipped fully configured and ready to be used right away! But of course some physical assembly is required. This is explained in our Proprietary Lab Guide/Manual

This document also explains all the configuration steps. Therefore, you'll be able to re-create the configuration by yourself in case this is needed.

All IP Phones are connected to the CME Router through a LAN Switch. A 3560v2-PS PoE Switch (Power over Ethernet) is included, so no External Power Supply is needed for the IP Phones.

One port of the Switch would be connected to the Router's Ethernet interface, while the other ports would be used for the IP Phones.

No other Hardware is required to make calls between the Phones connected to the LAN!

However, if you wish to make calls outside the LAN, additional Hardware would be needed.

For that purpose this Lab kit includes an FXO voice card and a PVDM3 internal Module.
This gives you Voice Channel to the outside world (PSTN).

Other cards such as FXS & MFT are available as an upgrade option (please request price)


Training Materials:

These are the main Training Materials sections that you'll find in the Disk:

- Proprietary CCNA Voice Lab User Guide (Configuration & Installation Setup Guide)
- Lab Exercise Guide: CCNA Voice Lab Manual by Brent Sieling.
- eBooks: CICD 210-060 & CIVND 210-065 Official Cert Guide and many others.
- Training Videos: A complete collection of Videos for the CICD & CIVND Exams!
- White Papers: Multiple articles for specific topics: Voice Cards, Dial-Peers, CME/CUCM, etc.
- Exam Questions & Answers: CCNA Collaboration Exam Questions & Answers.
- Cisco IOS Images: Latest IOS Images for all devices (Routers and Switches)
- Voice-related Software: CME 8.6, CCP 2.7, IP-Comm 8.6 & dozens of IP Phone Firmware Files!

NOTE: Some upgrades may be required to do some of these Lab Exercises (e.g: FXS/FXO cards)


Please take into account that we need 2-3 business days to configure and test this Lab kit.